汽車塑料燃油管檢測

汽車塑料燃油管檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

QC/T 798-2008 汽車用多層塑料燃油管

本標準規定了汽車用多層塑料燃油管及管總成的尺寸規格、外觀、技術要求、試驗方法、檢驗規則和標志、包裝、運輸和儲存。、本標準適用于工作溫度在-40℃到+115℃之間(連續使用溫度不應超過90℃)，大工作壓力不超過0.7MPa的多層塑料燃油管

Multi-layers plastic tubing for automotive fuel system

BS ISO 13775-2:2000 汽車用熱塑管和軟管.石油類燃料用

This part of ISO 13775 specifies test requirements and test methods for extruded thermoplastic tubing and hoses for use in petroleum-based-fuel lines

Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications

BS ISO 13775-2:2016 汽車用熱塑管和軟管.石油類燃料用

Thermoplastic tubing and hoses for automotive use. Petroleum-based-fuel applications

DB34/T 1664-2012 汽車塑料燃油箱

本標準規定了汽車塑料燃油箱（以下簡稱燃油箱）的術語和定義、要求、試驗方法、檢驗規則、標識、包裝、運輸和貯存。 本標準適用于汽車用吹塑型塑料箱體，經焊接、組裝零配件而成的汽車塑料燃油箱總成

Automotive Plastic Fuel Tank

QC/T 1121-2019 汽車用塑料燃油箱

Plastic fuel tank for automobiles

JASO M316-1980 汽車燃油軟管

Fuel hoses for automobiles

BS ISO 13775-1:2000 汽車用熱塑管和軟管.非燃料應用

This part of ISO 13775 specifies the test requirements and the test methods for extruded thermoplastic tubing and hoses for use in vehicles powered

Thermoplastic tubing and hoses for automotive use - Non-fuel applications

BS ISO 13775-1:2015 汽車用熱塑管和軟管.非燃料應用

Thermoplastic tubing and hoses for automotive use. Non-fuel applications

KS R 3044-2008 汽車柴油機高壓燃料噴射管

? ??? ???? ?? ??? ???? ?? ?? ??? ?? ??(?? ???? ??

Automotive diesel engines-Steel tubes for high-pressure fuel injection pipes

AS 3570:1998 汽車柴油機燃料

Sets out requirements for automotive diesel fuel (intended for use in high speed diesel engines) which would minimize engine problems, particularly

Automotive diesel fuel

GOST R 51866-2002 汽車燃料.鉛汽油.規范

Automotive fuels. Unleaded petrol. Specifications

BS ISO 13775-1:2021 汽車用熱塑性管材和軟管 非燃料應用

Thermoplastic tubing and hoses for automotive use. Non-fuel applications

SANS 342:2006 汽車用柴油機燃料

specifies two grades of automotive diesel fuel (low sulphur grade and standard grade) suitable for use in compression-ignition engines, including

Automotive diesel fuel

JJF(汽車) 02-2008 汽車速度計校準規范

Automobile Speedometer Calibration Specification

GB/T 20462.2-2006 汽車用熱塑性非增強軟管和軟管.第2部分;石油基燃油用

GB/T 20462的本部分規定了公稱內經2mm～14mm的六種型別的內燃機驅動的車輛石油基燃油管線用擠出熱塑性非增強軟管的結構、類型、尺寸、試驗要求和試驗方法

Thermoplastic tubing and hoses for automotive use.Part 2:Petroleum-based-fuel applications

QC/T 798-2008 汽車用多層塑料燃油管

本標準規定了汽車用多層塑料燃油管及管總成的尺寸規格、外觀、技術要求、試驗方法、檢驗規則和標志、包裝、運輸和儲存。、本標準適用于工作溫度在-40℃到+115℃之間(連續使用溫度不應超過90℃)，大工作壓力不超過0.7MPa的多層塑料燃油管

Multi-layers plastic tubing for automotive fuel system

BS ISO 13775-2:2000 汽車用熱塑管和軟管.石油類燃料用

This part of ISO 13775 specifies test requirements and test methods for extruded thermoplastic tubing and hoses for use in petroleum-based-fuel lines

Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications

BS ISO 13775-2:2016 汽車用熱塑管和軟管.石油類燃料用

Thermoplastic tubing and hoses for automotive use. Petroleum-based-fuel applications

DB34/T 1664-2012 汽車塑料燃油箱

本標準規定了汽車塑料燃油箱（以下簡稱燃油箱）的術語和定義、要求、試驗方法、檢驗規則、標識、包裝、運輸和貯存。 本標準適用于汽車用吹塑型塑料箱體，經焊接、組裝零配件而成的汽車塑料燃油箱總成

Automotive Plastic Fuel Tank

QC/T 1121-2019 汽車用塑料燃油箱

Plastic fuel tank for automobiles

JASO M316-1980 汽車燃油軟管

Fuel hoses for automobiles

BS ISO 13775-1:2000 汽車用熱塑管和軟管.非燃料應用

This part of ISO 13775 specifies the test requirements and the test methods for extruded thermoplastic tubing and hoses for use in vehicles powered

Thermoplastic tubing and hoses for automotive use - Non-fuel applications

BS ISO 13775-1:2015 汽車用熱塑管和軟管.非燃料應用

Thermoplastic tubing and hoses for automotive use. Non-fuel applications

KS R 3044-2008 汽車柴油機高壓燃料噴射管

? ??? ???? ?? ??? ???? ?? ?? ??? ?? ??(?? ???? ??

Automotive diesel engines-Steel tubes for high-pressure fuel injection pipes

AS 3570:1998 汽車柴油機燃料

Sets out requirements for automotive diesel fuel (intended for use in high speed diesel engines) which would minimize engine problems, particularly

Automotive diesel fuel

GOST R 51866-2002 汽車燃料.鉛汽油.規范

Automotive fuels. Unleaded petrol. Specifications

BS ISO 13775-1:2021 汽車用熱塑性管材和軟管 非燃料應用

Thermoplastic tubing and hoses for automotive use. Non-fuel applications

SANS 342:2006 汽車用柴油機燃料

specifies two grades of automotive diesel fuel (low sulphur grade and standard grade) suitable for use in compression-ignition engines, including

Automotive diesel fuel

JJF(汽車) 02-2008 汽車速度計校準規范

Automobile Speedometer Calibration Specification

GB/T 20462.2-2006 汽車用熱塑性非增強軟管和軟管.第2部分;石油基燃油用

GB/T 20462的本部分規定了公稱內經2mm～14mm的六種型別的內燃機驅動的車輛石油基燃油管線用擠出熱塑性非增強軟管的結構、類型、尺寸、試驗要求和試驗方法

Thermoplastic tubing and hoses for automotive use.Part 2:Petroleum-based-fuel applications