ASTM D3035-2015 外徑受控聚乙烯塑料管(SPD-PR)規格

　　ASTM D3035-2015

　　中文名稱：外徑受控聚乙烯塑料管(SPD-PR)規格

　　英文名稱：Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

　　原文名稱：Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

　　范 圍：This specification covers polyethylene (PE) pipes made in thermoplastic pipe dimension ratios based on outside diameter, and pressure rated for water. All pipes produced under this specification may be used for the transport of water, industrial process liquids, effluents, slurries, municipal sewage, etc. Included are criteria for classifying PE plastic pipe materials and PE plastic pipe, and a system of nomenclature for PE plastic pipe. PE pipes shall be evaluated by the test procedures given herein, and shall conform to specified requirements for workmanship, dimensions, sustained pressure at ambient and elevated temperatures, hydrostatic burst pressure, tensile strength at yield, and environmental stress cracking.

　　發布日期：2015-03-01

　　實施日期：2015-03-01

　　標準組織：美國試驗與材料協會標準(ASTM)

　　ICS分類號：(23.040.20)塑料管

　　中國標準分類號：(G33)塑料型材

　　同一中標分類下的其他標準

　　• ASTM C578-2014a硬質泡沫聚苯乙烯隔熱材料規格

　　• ASTM C582-2009耐蝕設備用接觸模塑增強熱固塑料層壓材料的規格

　　• ASTM C1409-2008測量和評定絕緣管及部件數量的指南

　　• ASTM D706-2009醋酸纖維素模塑與擠壓料規格

　　• ASTM D707-2009醋酸丁酸纖維素模制與擠壓料規格

　　• ASTM D1527-1999(2005)丙烯腈-丁二烯-苯乙烯塑料管(40號表和80號表)規格

　　• ASTM D1598-2002(2009)恒定內壓下塑料管破裂時間試驗方法

　　• ASTM D1598-2015a

　　• ASTM D1599-2014e1塑料管、管道及管配件短時間耐液壓強度試驗方法