銅管對流散熱器檢測

銅管對流散熱器檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 16803-2018供暖、通風、空調、凈化設備術語

本標準界定了供暖、通風、空調、凈化設備的構造、性能通用術語和定義。本標準適用于供暖、通風、空調、凈化設備的設計、生產和應用，也適用于供暖、通風、空調、凈化設備的科研、教學和出版工作。本標準不適用于鍋爐等熱源設備和交通工具使用的供暖設備、消煙、排毒設備和通用的風機等通風設備以及交通工具和特殊用途的空調設備。

GB 50333-2013醫院潔凈手術部建筑技術規范

本規范適用于醫院新建、改建、擴建的潔凈手術部工程的設計、施工和驗收。

GB 50671-2011飛機噴漆機庫設計規范

本規范適用于新建、改建和擴建的飛機噴漆機庫的設計。

GB 51069-2014中藥藥品生產廠工程技術規范

本規范適用于新建、改建、擴建的中藥藥品生產廠房及設施的設計、施工、驗收、確認及驗證等。

GB 51157-2016物流建筑設計規范

本規范適用于新建、擴建、改建的物流建筑設計。不適用于具有重大危險源的火藥、炸藥、化工品類的危險品物流建筑。

GB/T 51188-2016建筑與工業給水排水系統安全評價標準

本標準適用于新建、擴建、改建和既有建筑與工業的給水排水系統安全評價。本規范不適用于軍工等特殊行業建筑與工業的給水排水系統安全評價。

CECS 224-2007節能型雙向集熱衛浴間應用技術規程

本規程適用于新建、擴建和改建的民用住宅衛浴間及其他建筑衛浴設施的設計、施工及驗收。

CECS 424-2016預制溝槽保溫模塊地面輻射供暖系統應用技術規程

本規程適用于民用與一般工業建筑以低溫熱水為熱媒或以加熱電纜為加熱部件的預制溝槽保溫模塊地面輻射供暖系統的設計、施工和驗收。

YC/T 9-2015卷煙廠設計規范

本標準規定了卷煙廠設計的技術要求。本標準適用于卷煙廠技術改造工程設計。

JG/T 221-2016銅管對流散熱器

本標準規定了以銅管鋁串片為散熱元件的自然對流銅管對流散熱器(以下簡稱“對流器”)的術語和定義，分類與標記，材料與結構，要求，試驗方法，檢驗規則，標志、使用說明書和合格證，包裝、運輸和貯存。本標準適用于工業與民用建筑中，以不高于95 ℃且水質符合GB/T 29044-2012中4.5規定的熱水為熱媒的對流器。

JG/T 409-2013供冷供暖用輻射板換熱器

本標準規定了供冷供暖用輻射板換熱器(以下簡稱輻射板)的術語和定義、分類和標記、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于水溫不高于45 ℃,壓力不高于0.8 MPa的建筑室內的輻射板。

HJ 508-2009環境標志產品技術要求.采暖散熱器

本標準規定了采暖散熱器環境標志產品的術語和定義、基本要求、技術內容及其檢驗方法。本標準適用于工業、民用建筑中，以熱水或蒸汽為熱媒的采暖散熱器，不適用于鋼制閉式串片散熱器。

JB/T 11248-2012金屬復合翅片管對流散熱器技術規范

本標準規定了金屬復合翅片管對流散熱器（簡稱翅片管對流散熱器）的術語和定義、分類、型號、參數、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存等。本標準適用于建筑中以熱水和蒸汽為熱媒的金屬復合翅片管對流散熱器。

DL 5027-2015電力設備典型消防規程

本規程規定了電力設備及其相關設施的防火和滅火措施，以及消防安全管理要求，適用于發電單位、電網經營單位，以及非電力單位使用電力設備的消防安全管理。電力設計、安裝、施工、調試、生產應符合本規程的有關要求。本規程不適用于核能發電單位。

EN 14336-2004建筑物取暖系統.水基取暖系統的安裝和交付使用

This document specifies the requirements for the installation and commissioning of water-based heating systems in buildings with a maximum operating temperature of 110 oC and a maximum operating pressure of 6 bar.This document covers the system's requirements for the installation and commissioning of individual components of the system (e.g. heat generators, pumps, controls). It does not cover the specific commissioning requirements for these components.This document does not cover the installation or commissioning of attached systems (e.g. air conditioning, domestic hot water or ventilation systems).This document covers only the technical requirements, and

DIN EN 442-1-2015散熱器和對流器.第1部分:技術規范和要求;德文版本EN 442-1-2014

This European Standard defines the technical specifications and requirements of radiators and convectors to be installed in heating systems in buildings including assessment and verification of constancy of performance. This European Standard deals with radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote energy source. This European Standard does not apply to independent heating appliances. This European Standard also defines the additional common data that the manufacturer shall provide with the product in order to ensure the correct application of the products.

DIN EN 624-2011專用LPG器具規范.在車輛和船舶上安裝的室內密封LPG空間加熱裝置;德文版本EN 624-2011

This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of types C(see CEN/TR 1749)with combustion air intake and outlet for the products of combustion in the wall, roof of floor,combined or not.

DIN EN 15502-2-2-2014燃氣中央供暖鍋爐.第2-2部分:B1型號用具專門標準.德文版本EN 15502-2-2-2014

This European Standard specifies, the requirements and test methods concerning, in particular the construction, safety, fitness for purpose, and rational use of energy, as well as the classification and marking of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners and are hereafter referred to as "boilers". Where the word boiler is used, it must be read as the boiler including its connecting ducts, ducts and terminals, if any. This European Standard covers gas-fired central heating boilers type B11, B11BS, B12, B12BS, B13, B13BS according to the classification in CEN/TR 1749:2009: a) that have a nominal heat input (on the basis of net calorific value) not exceeding 70 kW; b) that use one or more combustible gases of the three gas families at the pressures stated in EN 437; c) where the temperature of the heat transfer fluid does not exceed 105 °C during normal operation; d) where the maximum operating pressure in the water circuit does not exceed 6 bar; e) Which can give rise to condensation under certain circumstances; f) which are declared in the installation instructions to be either a "low temperature boiler" or a "standard boiler". If no declaration is given the boiler is to be considered a "standard boiler" g) which are intended to be installed either indoors or in a partially protected place; h) which are either not intended to produce hot water, or are intended to produce hot water either by the instantaneous or storage principle, the whole being marketed as a single unit. i) which are designed for either sealed water systems or for open water systems j) which are either modular boilers, or no modular boilers. This European Standard is to be used in conjunction with the General Requirements Standard EN 15502-1. For applications within the scope of the PED further requirements may be necessary (e. g. situations where the maximum allowable temperature exceeds 110 °C, or where volume times maximum allowa