歡迎訪問中科光析科學技術研究所官網!

免費咨詢熱線
400-640-9567|
油漆和涂料檢測項目報價???解決方案???檢測周期???樣品要求? |
點 擊 解 答??![]() |
本標準描述了對人造納米材料研發與使用的潛在風險進行識別、評估、處理、決策和溝通的完整過程,以保護公眾、消費者、從業人員以及環境的健康與安全。盡管本標準提出的產品監管和風險管理全過程并非只針對納米材料,但是通過聚焦與納米技術有關的特定信息和問題,對公認的方法提供了盡可能的補充。本標準給出了需要做風險評估和風險管理決策的信息指南,在信息不完整或不確定時,如何通過合理的假設和適當風險管理操作進行風險管理。本標準還包含如何更新假設、決策和實踐,使其成為可用的新信息的方法,以及怎樣將信息和決策傳達給利益相關方的方法。本標準建議各組織采用透明和可靠的方法管理納米材料。為此,本標準描述了對已有納米材料信息進行組織、文件記錄和交流的全過程,包括確認哪些信息不完整,說明怎樣解決信息的缺失,以及解釋風險管理決策和行動的依據。
本標準規定了電子工業元器件生產中水處理設備的完好要求和檢查、評定方法。 本標準適用于電子工業企業電子元器件、集成電路制造以及清洗工序用電子級水制造設備。
SN/T 3694的本部分規定了化妝品中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于化妝品中全氟已酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了滅火劑中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于滅火劑中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了潤滑劑中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于潤滑劑中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了石蠟中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于石蠟中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了洗滌劑中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于洗滌劑中全氟已酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了油墨中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于油墨中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了油漆和涂料中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于油漆和涂料中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了膠粘劑中全氟烷基化合物的液相色譜-質譜/質譜測定方法。本部分適用于膠粘劑中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了皮革中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于皮革中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了上光劑中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于上光劑中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了食品接觸材料中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于一次性紙杯、保鮮膜、不粘鍋涂層中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
SN/T 3694的本部分規定了塑料制品中全氟烷基化合物的液相色譜-串聯質譜測定方法。本部分適用于塑料制品中全氟己酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸、全氟丁烷磺酸、全氟己烷磺酸、全氟辛烷磺酸、全氟癸烷磺酸的測定。
本標準規定了油漆和涂料中短鏈氯化石蠟(C10~C13)的氣相色譜測定法。本標準適用于油漆和涂料中短鏈氯化石蠟(C10~C13)含量的測定。
本規程適用于10層及10層以上或房屋高度大于28m的住宅建筑以及房屋高度大于24m的其他高層民用建筑混凝土結構。非抗震設計和抗震設防烈度為6至9度抗震設計的高層民用建筑結構,其適用的房屋大高度和結構類型應符合本規程的有關規定。本規程不適用于建造在危險地段以及發生震斷裂小避讓距離內的高層建筑結構。
1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable water based agent fire extinguishers. These fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and with the National Fire Code of Canada. 1.2 The requirements for performance during fire testing of water based agent fire extinguishers are specified in the Binational Standard for Rating and Fire Testing of Fire Extinguishers, ANSI/UL 711 CAN/ULC-S508. 1.3 As used in these requirements, the term "extinguisher" refers to all extinguishers or any part thereof covered by these requirements, unless specifically noted otherwise. This new edition of ANSI/UL 8 CAN/ULC-S554 is a binational standard that has been harmonized with the requirements of Canada. This edition includes a title change, an expansion of the standard scope to specify Canadian installation requirements, reorganized and renumbered requirements, and the addition of operating instructions pictographs to the marking section.
1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable carbon-dioxide fire extinguishers. Carbon-dioxide fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and the National Fire Code of Canada. 1.2 The requirements for performance during fire testing of carbon-dioxide fire extinguishers are specified in the Binational Standard for Rating and Fire Testing of Fire Extinguishers, ANSI/UL 711 CAN/ULC-S508. 1.3 As used in these requirements, the term "extinguisher" refers to all extinguishers or any part thereof covered by these requirements, unless specifically noted otherwise. This new edition of ANSI/UL 154 CAN/ULC-S503 is a binational standard that has been harmonized with the requirements of Canada. This edition includes an expansion of the standard scope to specify Canadian installation requirements, reorganized and renumbered requirements, and the addition of operating instructions pictographs to the marking section.
前沿科學
微信公眾號
中析研究所
抖音
中析研究所
微信公眾號
中析研究所
快手
中析研究所
微視頻
中析研究所
小紅書