注塑機交流伺服驅動系統檢測

注塑機交流伺服驅動系統檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 32515-2016注塑機專用變頻調速設備

本標準規定了用于塑料注射成型機專用變頻調速設備的分類、使用條件、技術要求、試驗項目及標志、包裝、運輸與貯存。本標準適用于額定輸入電壓為交流1 kV等級及以下，額定輸入頻率為50 Hz或60 Hz，輸出電壓不大于1 kV，輸出頻率小于600 Hz的注塑機用變頻調速設備(以下簡稱“調速設備”)。

JB/T 11730-2013工業機械電氣設備及系統 注塑機交流伺服驅動系統技術條件

本標準規定了注塑機交流伺服驅動系統的技術要求及標志、包裝、儲運、檢驗與試驗方法等。本標準適用于控制液壓類型注塑機的交流伺服驅動系統(以下簡稱“伺服驅動系統”)。其他相關機械的交流伺服驅動系統可參照本標準。

EN 201-2009塑料盒橡膠機械.注射模制機械.安全要求

This European Standard specifies the essential safety requirements for injection moulding machines for the processing of plastics and/or rubber. All hazards listed in Clause 4 are covered byThis standard. The following machines are not covered: machines on which the clamping unit can only be operated by the physical force of the operator; injection moulding machines with pneumatic drives for the platen movement; injection moulding machines with vertical platen movements driven by an electrical axis; blow moulding machines associated with an injection process (EN 422); machines for reaction injection moulding (RIM) (EN 1612-1); presses (EN 289); footwear moulding machines covered by EN 1845. The safety requirements for the interaction between injection moulding machines and ancillary equipment are specified.This standard covers magnetic clamping systems only if: machines have horizontal clamping units; and the mould area is protected by guards; and such systems are delivered at the same time as the injection moulding machine by the machine manufacturer.This standard does not cover requirements for the design of an exhaust system.This standard is not applicable to injection moulding machines which are manufactured before the date of its publication as an EN.