土方工程和建筑工程機械檢測

土方工程和建筑工程機械檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB 50603-2010鋼鐵企業總圖運輸設計規范

本規范適用于新建、擴建、改建的鋼鐵企業總圖運輸設計。

GB 50669-2011鋼筋混凝土筒倉施工與質量驗收規范

本規范適用于貯存散料，且平面形狀為圓形或多邊形的現澆鋼筋混凝土筒倉、壓縮空氣混合粉料調勻倉的施工與質量驗收。

GB/T 51068-2014煤炭工業露天礦機電設備修理設施設計規范

本規范適用于煤炭工業露天煤礦新建、改建及擴建機電設備修理設施工程的設計。

ISO 13766-2-2018土方工程和建筑工程機械. 帶內部電源的機器的電磁兼容性(EMC). 第2部分: 功能安全的附加EMC要求

This document provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as classified in ISO/TR 12603:2010: — drilling and foundation equipment; — equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement; — road construction and maintenance machinery and equipment. It deals with EMC requirements related to the functional safety of the machinery, its electrical/ electronic subassemblies (ESA) and of separate ESA. This document is relevant only to the safety-related parts of control systems (SRP/CS) as defined in ISO 13849-1:2015 using electrical/electronic components which meet design requirements equal to or greater than safety?related performance level PL b as defined in ISO 13849-1:2015. It also deals with electrical and electronic components or separate ESA intended to be f

NF E58-048-2008土方機械.壓實挖掘機的傾翻防護結構(TOPS).實驗室試驗和性能要求

La présente Norme européenne établit un moyen reproductible pour évaluer les caractéristiques de charge des structures de protection au basculement (TOPS) sous charges statiques et prescrit les critères de performance d'un échantillon représentatif dans ces conditions de charge.Elle est applicable aux TOPS des mini-pelles (telles que définies dans l'EN ISO 6165) à flèche pivotante ayant une masse en service (voir 3.14) de 1000 à 6000 kg.

DIN EN 15573-2009土方機械.道路交通循環的設計要求.英文版本DIN EN 15573-2009-09

This European Standard specifies the requirements for earth-moving machinery described in EN ISO 6165 [2],intended to travel on the road.This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising fromthe significant hazards, hazardous situations and events during on road travel of earth-moving machinery.This European Standard does not apply to earth-moving machinery with a width exceeding 3 metres (see4.2.5).This European Standard does not apply to earth-moving machinery on legs e.g. walking excavators.This European Standard does not cover the hazards relevant to non-riding and remote control earth-movingmachinery.This European Standard is not applicable to earth-moving machines manufactured before the publication dateof this European Standard by CEN.

DIN EN ISO 13766-2-2018土方工程和建筑工程機械. 帶內部電源的機器的電磁兼容性(EMC). 第2部分: 功能安全的附加EMC要求(ISO 13766-2-2018); 德文版本EN ISO 13766-2-2018

This International Standard provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility of Building-, road-construction and earth moving machines as defined in ISO 6165 and ISO 8811 and covered by ISO/TC 127 respective ISO/TC 195. It deals with additionally EMC requirements under the aspect of Functional safety. General EMC-requirements under typical Surrounding conditions are covered in part 1 of ISO 13766. This standard is only relevant for functions of machines which have to fulfil requirements greater or equal SIL 1 as defined in ISO 15998 or greater or equal Performance Level b as defined in ISO 13849. Electrical and/or electronic component(s) or separate technical unit(s) intended to be fitted in construction machinery under the restriction of greater or equal SIL 1 or greater or equal Performance Level b - as applicable above - are also dealt with in this International Standard. The following electromagnetic disturbance phenomena are evaluated: - Radiated electromagnetic field by external sources; - Radiated electromagnetic field by sources located onboard (antenna inside/outside); - Magnetic fields; - Electrical field; - electrostatic discharge; - conducted and coupled electrical transients. Construction machinery can have DC and/or AC internal electrical power supply systems. Machines that are designed to be supplied by the \"Public Mains Network\" are specifically excluded.