鋰離子二次電池檢測

鋰離子二次電池檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 3883.1-2014手持式、可移式電動工具和園林工具的安全 第1部分:通用要求

GB 3883的本部分涉及電動機或電磁鐵驅動的:--手持式電動工具(第2部分);--可移式電動工具(第3部分);--園林工具(第4部分)。以下簡稱“工具”。交流單相或直流工具的額定電壓不大于250 V,交流三相工具的額定電壓不大于440 V。大額定輸入功率不超過3 700 W。本部分涉及人們?cè)谡２僮饕约昂侠砜深A(yù)見的使用工具時遇到的由工具引發的危險。帶電加熱元件的工具屬本部分范圍。這些加熱元件的要求在GB 4706的相關部分中規定。對于不與電網隔離、且基本絕緣由不按工具額定電壓設計的電動機,其要求在附錄B中規定。對于由可充電電池供電的電動機驅動或電磁鐵驅動的工具以及用于這些工具的電池包,其要求在附錄K中規定。對于能直接接在市電或非隔離電源上操作和/或充電的這類工具,其要求在附錄L中規定。不用對工具自身作任何改造便能夠安裝到一個支架或工作臺當作固定式工具使用的手持式電動工具屬于本部分范圍,由第3部分來規定。本部分不適用于:--在爆炸性環境(塵埃、蒸汽或氣體)中使用的工具;--制備和加工食品用工具;--醫療用工具;--與化妝品和藥品一起使用的工具;--加熱工具;--電動機驅動的家用或類似用途電器;--工業機床用電氣設備;--用來制作模型的由低壓變壓器驅動的小型臺式工具,如制作遙控飛機模型或汽車模型等。

GB/T 7169-2011含堿性或其它非酸性電解質的蓄電池和蓄電池組型號命名方法

本標準規定了含堿性或其他非酸性電解質的蓄電池和蓄電池組的型號命名方法。本標準適用于含堿性或其他非酸性電解質的蓄電池和蓄電池組型號命名。

GB/T 8718-2008炭素材料術語

本標準規定了炭素材料術語的分類規則，炭素材料的原料術語、產品術語、表觀質量術語、化學分析和物理檢測術語。本標準適用于編制各種標準、技術性文件、資料、編寫和翻譯手冊、教材及書刊等。

GB/T 26493-2011電池廢料貯運規范

本標準規定了電池廢料貯運的要求、貯存方式及設施、運輸要求、運輸方式及容器等。 本標準適用于電池廢料的貯存與運輸。

GB/T 26932-2011充電電池廢料廢件

本標準規定了充電電池廢料廢件的分類、要求、試驗方法、檢驗規則、包裝、標志、運輸、貯存及合同(或訂貨單)等。本標準適用于各生產工序、使用過程及流通領域產生的充電電池廢料廢件。

GB/T 34695-2017廢棄電池化學品處理處置術語

本標準規定了廢棄電池化學品處理處置術語。本標準適用于廢棄電池化學品的分類、收集、貯存、運輸、回收、處理和處置及日常管理等相關活動。

QB/T 4496-2013電滅蚊拍

本標準規定了電滅蚊拍的術語和定義、產品分類和型號命名、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于家用和類似用途的、額定充電電壓不超過交流250V,或使用一次性電池的電滅蚊拍。本標準不適用于:——打算使用在經常產生腐蝕性或爆炸性氣體(如灰塵、蒸氣或可燃性氣體)特殊環境場所的器具;——驅、滅蚊藥片用恒溫電加熱器(QB/T1741);——電熱片蚊香(GB 18417);——使用時與交流電網連接的滅蚊器具。本標準并未涉及:——無人照看的幼兒和殘疾人使用器具時的危險;——幼兒玩耍器具的情況。

QJ 20001-2011月球探測工程術語

本標準規定了月球探測工程研制和應用的基本術語。本標準適用于月球探測工程及其有關領域。

SJ/T 11685-2017平衡車用鋰離子電池和電池組規范

本標準規定了平衡車用鋰離子電池和電池組的術語和定義、要求、試驗方法、質量評定及標識、包裝、運輸和儲存。本標準適用于平衡車用鋰離子電池和電池組。對于無自平衡功能的滑板車等類似產品的鋰離子電池、電池組也參考適用。

TB/T 3097-2004鐵路車站非正常作業進路安全監督裝置

本標準規定了車站因施工或其他原因?qū)е氯炕虿糠中盘?hào)聯鎖失效時，采用無線傳輸方式反映道岔開通位置、進路狀況的進路安全監督裝置(以下簡稱“裝置”)的基本功能、可選功能、技術要求、環境要求、試驗方法、檢測規則、標志、包裝、運輸、貯存。\t本標準適用于裝置的研制、生產、檢測、使用。

CNS 15391-1-2010電動車輛推進用二次電池組－第1部：鋰離子單電池之性能測試

本標準規定電動車輛，包含電池動力車輛(battery electric vehicles, BEV)及混合動力車輛(hybrid electric vehicles, HEV)之推進用二次鋰離子單電池，在性能及壽命方面之試驗方法。制定本標準之目的系為電池動力車輛及混合動力車輛(以下稱電動車輛)所使用之推進用二次鋰離子單電池，針對電容量、電功率密度、能量密度、儲存壽命及循環壽命等實質特性，訂定試驗程序。本標準為電動車輛推進用二次鋰離子單電池，提供測試其基本性能特性之標準試驗程序及試驗條件，須透過此等試驗，用以取得在不同設計之電池系統及電池組中之二次鋰離子單電池之基本性能水準及必要數據。

CNS 15391-2-2010電動車輛推進用二次電池組－第2部：鋰離子單電池之可靠度及異常使用效應測試

本標準規定電動車輛，包含電池動力車輛(battery electric vehicles, BEV)及混合動力車輛(hybrid electric vehicles, HEV)之推進用二次鋰離子單電池，作為評估(observe)其可靠度及異常使用效應(abuse)之試驗程序。制定本標準之目的系為電動車輛(包含電池動力車輛及混合動力車輛)所使用之動力用二次鋰離子單電池，針對其基本特性訂定標準試驗程序及試驗條件，須透過此等試驗，用以取得在不同設計之電池系統及電池組中之二次鋰離子單電池之可靠度及異常使用效應方面之必要數據。本標準提供試驗結果說明之標準分類，可用于電池系統或電池組之設計。

IEC 62485-5-2020二次電池和電池裝置的安全要求. 第5部分: 固定鋰離子電池的安全操作

This part of IEC 62485 applies to the installation of one or more stationary secondary batteries having a maximum aggregate DC voltage of 1500 V to any DC part of the power network, and describes the principal measures for protections during normal operation or under expected fault conditions against hazards generated from: electricity; short-circuits; electrolyte; gas emission; fire; explosion. This document provides requirements on safety aspects associated with the installation, use, inspection, and maintenance and disposal of lithium ion batteries used in stationary applications. This document covers stationary batteries for industrial applications that are installed in separate closed buildings or housings as well as stationary batteries that are installed in public buildings, offices and private residences. This document also covers the maintenance and disposal of lithium ion batteries used in stationary applications. Batteries containing lithium metal are not covered by this document. Examples of the main applications are; telecommunications; power station operation; central emergency lighting and alarm systems; uninterruptible power supplies (UPS); stationary engine starting; photovoltaic systems. In general, the safety requirements for secondary batteries and battery installations - General safety information and definitions are specified for lead-acid, nickel-cadmium and nickel-metal hybrid batteries in accordance with IEC 62485-1.

IEC 62485-6-2021二次電池和電池裝置的安全要求. 第6部分: 牽引應用中鋰離子電池的安全操作

This part of IEC 62485 applies to battery installations used for electric off-road vehicles; it does not cover the design of such vehicles. Examples of the main applications are: industrial; cleaning machines; trucks for material handling, for example, lift trucks, tow trucks, automatic guided vehicles; electrically propulsed lifting platforms; other applications; electric powered boats and ships. This document covers the safety aspects of battery installations in such applications. This document does not cover railway vehicles, for traction railway application, see IEC 62928. This document does not cover batteries and battery installations for the propulsion of electric road vehicles. In the event of there being a variation of requirements between this document and those of a relevant product standard (e. g. goods vehicles, bicycles, wheel chairs, golf carts), then the product standard requirements take precedence. Lithium ion cells and batteries used in traction industrial application are intended to fulfil safety requirements in accordance with IEC 62619. The maximum voltages are limited to AC 1000 V and to DC 1500 V, and the principal measures for protection against hazards, generally from electricity, gas emission and electrolyte to prevent fire and explosion are described. This document provides requirements on safety aspects associated with the installation, use, inspection, maintenance and disposal of lithium ion batteries. Batteries containing lithium metal are not covered by this document. In general, the safety requirements for secondary batteries and battery installations - General safety information and definitions are specified for lead-acid, nickel-cadmium and nickel-metal hybrid batteries in accordance with IEC 62485-1.

UL 399-2008飲用水冷卻器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.